PART II
The Carbon Screen
01/23/04
Buell Part#'s to fit the flyscreen
M0602.0 M0604.D M0605.D M1600.DPMD |
WELL NUT 8-32 BRACKET RH BRACKET LH SCREEN, PRIMERED |
QTY 4 QTY 1 QTY 1 QTY 1 |
04/09/02
Finished
03/15/02
Small stoke of genius hit me out of nowhere & I figured out
how to mount it!
(very rare for me to think of something that works...)
When you don't have the brackets you need get some flat stock
& make your own
by bending the metal with a pair of large channel locks &
rivet them to the screen LOL
03/14/02
Still working on it
Just got my primered ready to paint Buell Flyscreen in today & have spent the afternoon looking at various ways to mount it.
I apologize for the quick & dirty pictures I will post much better ones once I have finalized the mount & have the shield painted etc... BTW my headlight is adjusted so bad that when you turn the highbeam on it doesn't even shine on the road... I'm relatively sure there is an adjustment inside the headlight nacelle to set the beam angle, but for this particular change I am going to physically angle the entire headlight assembly down just abit so that it lets the flyscreen fit flush with the leading edge of the headlight (You can clearly see in the side view that it is not quite sitting right) |
The picture that
started this whole idea